Filter combination XXL-60M Metal

 414,95 (incl. btw)

This metal filter system is ideal for tasks in which sharp material such as stone, glass, or metal debris is being vacuumed. Plastic filter systems can wear out during such activities. The filter system functions as a dust separator, capturing up to 99,99% of the dust, preventing it from entering the vacuum cleaner. The filter system is designed with dimensions that fit into most transport vehicles, and its low weight makes it easy to transport. Not only is the filter system suitable for standard professional construction vacuum systems (Makita, Festool, Bosch), but also for powerful ones like the multi-engine construction vacuum systems from Record Power.

Select the desired options below or scroll down for more information about filter combination XXL-60M Metal.

In stock

Uitstekende klantenservice

Veilig betalen


This filter system is a dust separator and ideal for sucking up dust, wood chips, grit etc. in the (home) workshop or, for example, at home during a renovation. The system works as a pre-separator, filtering up to 99,99% of the dust which therefore does not end up in the vacuum cleaner.


  • Replace far fewer vacuum cleaner bags because almost all the dust ends up in the dustbin;
  • Continuous maximum suction power because the vacuum cleaner bag hardly fills up;
  • Work longer with the use of a larger dustbin in comparison with a vacuum cleaner bag;
  • Longer lifespan of the vacuum cleaner due to less wear and tear on the engine.

This filter system is due to the size of its inlet and outlet (125mm inner diameter) only suitable of central vacuum systems or very powerful professional multi-motor shop vacs.

If you have a question about filter combination XXL-60M metal, most of the answers can be found on the frequently asked questions page. If your question is not answered there, please contact us via our contact page.

The filter Combination XXL-60M Metal consists of the metal cyclone filter model XXL and the 60 liter metal dustbin. We have further developed the new metal model XXL filter, resulting in an increased filter efficiency from 99% to a maximum of 99,99%.

The metal filter system is particularly suitable for tasks where the material to be vacuumed could cause wear. This is possible, among other things, when vacuuming stone, glass, and metal debris. Additionally, both the filter and the dustbin are made of metal, allowing the filter system to be grounded, reducing the buildup of static electricity.

The filter is airtight connected to the dustbin using a rubber sealing gasket. Filter systems without a rubber gasket carry the risk of air being sucked in through the gaps, leading to a loss of suction power and a decrease in filter performance. For all our filter systems, we provide an NBR rubber sealing gasket. Sealing gasket made of foam or cork deteriorate over time.

The dustbin has a clamp lid and is airtight due to a rubber seal in the lid. The dustbin also features two stamped, reinforcing rings, preventing it from collapsing under high negative pressure. This is a common occurrence with flimsy (metal) drums and plastic buckets.

To be used with dust extraction:

  • Sander;
  • Table saw;
  • Sand blast cabinet;
  • Router;
  • Mitre saw;
  • Wall and floor grinder;
  • CNC router;
  • Vacuuming of (construction) floors;
  • And many other applications.


  • Filters up to 99,99%;
  • Minimum air flow: 13333 liter per minute (800m3/h);
  • Maximum air flow: 40000 liter per minute (2400m3/h);
  • Inlet and outlet inner diameter: 125mm;
  • Inlet and outlet outer diameter: 127,5mm;
  • Height: 1190mm;
  • width: 400mm;
  • Material: metal;
  • Colour: black.


  • Cyclone filter model XXL (metal);
  • 60 liter dustbin (metal);
  • Rubber gasket;
  • Fasteners.


  • The metal XXL filter has larger inner diameters (125mm) than the polymer XL filter (100mm).
  • This filter system is due to the size of its inlet and outlet (125mm inner diameter) only suitable of central vacuum systems or very powerful professional multi-motor shop vacs.
  • To ground the metal cyclone filter model XXL, a small amount of the black coating must be removed to allow the metal to make good contact with the collection bin and/or grounding cable.

Do you have questions? Most answers can be found on our FAQ page. Can’t find the answer? Please do not hessitate to contact us via our contact page.

You may also like…